Whenever you see a query nested inside another query in SQL, that's a subquery. A subquery is also known as an inner query while the one that contains it is called the main or outer query.

Subqueries are used to provide the main query with additional data in the form of a derived column or derived table, or they can filter the rows returned by the main query.

Subqueries can be quite difficult to understand, especially for beginners who are just starting out in SQL. This article will help simplify this concept so that it is much easier to understand. By the end, you should be able to use subqueries more easily to solve problems.

Table of Contents

Prerequisites:

Subqueries are an advanced SQL concept, so it's important to have a solid understanding of the basics of SQL: SELECT, FROM, WHERE, JOINS, the CASE statement, and the proper order for query execution.

How Subqueries Work

Let's start by considering an example of a query with a subquery.

SELECT * FROM registration WHERE student_id IN (SELECT id FROM student WHERE location = 'Lagos')
The above query has two parts: the main query and the subquery.

This is the main query:

SELECT * FROM registration WHERE student_id IN (...)
Notice that there is currently nothing in the brackets of the main query.

The part of the query that's enclosed in the brackets is the subquery. It's used to filter the rows returned by the main query. Let's look at the subquery code now:

SELECT id FROM student WHERE location = 'Lagos'

Execution Order

When you run the whole query in your management system like this:

SELECT * FROM registration WHERE student_id IN (SELECT id FROM student WHERE location = 'Lagos')
You'll get the result below:

The result is showing the registration details of all students from Lagos. But to get this result, SQL follows an execution order which we'll discuss below.

When you execute the whole query, behind the scenes, the subquery is evaluated first:

SELECT id FROM student WHERE location = 'Lagos'
The subquery retrieves the IDs of students from Lagos from the student table. You get a result like this:

Behind the scenes, these IDs returned by the subquery are provided to the main query, transforming the query to look like this:

SELECT * FROM registration WHERE student_id IN('STU1', 'STU13','STU2','STU4','STU23','STU27')
The main query compares each value in its student_id column with the IDs returned by the subquery. If a match is found, it returns the registration details of that student. Otherwise, the record is ignored.

You might wonder, "Why not just retrieve the IDs from the student table and directly pass them to the main query instead of using a subquery?"

Well, that's hardcoding. While the query will work at the moment, later when there are new students and you rerun the query, you'll only get details of the old students for whom you manually passed IDs to the main query. It'll exclude the new ones.

The subquery approach is dynamic: it continuously queries the student table to ensure that the results are always current.

Types of Subqueries

There are two types of subqueries based on dependency: non-correlated (independent) and correlated (dependent).

Non-correlated Subqueries

These are subqueries that are independent of the main query. When executed outside the main query, they'll work. A good example is the one used in the query above.

SELECT * FROM registration WHERE student_id IN (SELECT id FROM student WHERE location = 'Lagos')
It's important to note that subqueries, whether correlated or non-correlated, can appear in different parts of a SQL query. Where a subquery appears determines its role in the main query. It can function as a derived column, a derived table, or a filter.

Let's discuss the various parts of the main query where a subquery can appear and how they support the main query.

1. Subquery as a derived column

When you see a subquery in the SELECT statement, it's a derived column. A derived column is a column created by a query using values from other columns in a table. It's not stored in the database and exists only for the duration of the query.

For example, to calculate the percentage of total registrations for each course, you need the following three pieces of information in the same row:

• Course name
• Registration count for each course (numerator)
• Total registrations across all courses (denominator)

To start, you can write a main query that returns the names of all courses and the registration count for each of them:

SELECT course_name, COUNT(reg_id) AS registrations FROM course AS l LEFT JOIN registration AS r ON l.id = r.course_id GROUP BY course_name
Result:

The main query lists each course with its registration count. To calculate each course's percentage of total registrations, the total registrations for all courses must also be included in each row of the main query's result.

To achieve this, you can nest a subquery that returns the total number of registrations for all courses as a column to the main query, like this:

SELECT COUNT(reg_id) FROM registration
When this subquery is executed outside the main query, it returns the result below:

30 is total number of registrations for all courses. Now, to make the subquery a column of the main query, first enclose it in brackets like this:

(SELECT COUNT(reg_id) FROM registration)
Next, insert the subquery into the column list of the main query as shown below:

SELECT course_name, COUNT(reg_id) AS regs, (SELECT COUNT(reg_id) FROM registration) AS total --subquery FROM course AS l LEFT JOIN registration AS r ON l.id = r.course_id GROUP BY course_name
When executed, it returns the following result:

In the table above, the main query returns the course names and their registration counts, aliased as regs. The subquery adds a total column containing the total number of registrations for all courses, which is 30. The value (30) appears on every row of the result.

With the course names, registration counts, and the total number of registrations across all courses in each row, we can now calculate the percentage of total registrations for each course.

Formula:

Percentage of Total = regs / total * 100
First, both the regs and total column have integer values. If divided directly, the result will be 0. To prevent this, always cast the numerator to the FLOAT data type using the CAST() function as shown below:

-- casting numerator to float data type CAST( COUNT(reg_id) AS FLOAT)
After casting the numerator to FLOAT, proceed with the division like this:

CAST(COUNT(reg_id) AS FLOAT) -- Numerator / -- Divide sign (SELECT COUNT(reg_id) FROM registration) -- Denominator * 100 -- Convert to percentage
Let's bring it all together:

SELECT course_name, CAST(COUNT(reg_id) AS FLOAT)/ (SELECT COUNT(reg_id) FROM registration) * 100 AS percent_of_total FROM course AS l LEFT JOIN registration AS r ON l.id = r.course_id GROUP BY course_name
When the query above is executed, you get this result:

The result shows all courses with their percentages of total registrations. To control the number of decimal places of the values in the percent_of_total column, we can use the SQL ROUND() function to round them to one decimal place. See the updated query below:

SELECT course_name, ROUND(CAST(COUNT(reg_id) AS FLOAT)/ (SELECT COUNT(reg_id) FROM registration) * 100,1) AS percent_of_total FROM course AS l LEFT JOIN registration AS r ON l.id = r.course_id GROUP BY course_name
Result:

Finally, we have the percentage contribution of each course to the total registrations.

2. Subquery as a derived table

When you see a subquery in the FROM clause, it's a derived table. A derived table is a temporary table created from the result of a query. It's not permanently stored in the database and exists only while the query runs.

As an example, let's say you want to write a query that returns the number of students by region.

But when the student table is queried using the query below:

SELECT * FROM student
you discover it has no region, and instead it has a state column:

To solve this problem, you can leverage values in the state column to create a derived region column using the SQL CASE statement like this:

SELECT *, -- all columns of the student table CASE WHEN location IN('Abeokuta','Ibadan','Mokola','Iyana Ipaja','Lagos') THEN 'West' WHEN location IN('Anambra','Owerri','Enugu','Port Harcourt') THEN 'East' WHEN location IN('Abuja','Ilorin','Kaduna','Kano','Jos') THEN 'North' END AS region -- a derived region column FROM student
When the above query is executed, it returns the result below:

The result now shows all column from the student table with the region column created using the CASE statement.

Now that we have a region column, let's convert the entire query into a table subquery.

First, enclose the whole query in brackets and give it an alias:

(SELECT *, CASE WHEN location IN('Abeokuta','Ibadan','Mokola','Iyana Ipaja','Lagos') THEN 'West' WHEN location IN('Anambra','Owerri','Enugu','Port Harcourt') THEN 'East' WHEN location IN('Abuja','Ilorin','Kaduna','Kano','Jos') THEN 'North' END AS region FROM student) AS data_prep -- aliased data_prep
To use data_prep, place the entire query, including the brackets and alias, into a FROM clause, just as you would with a regular table:

FROM (SELECT *, CASE WHEN location IN('Abeokuta','Ibadan','Mokola','Iyana Ipaja','Lagos') THEN 'West' WHEN location IN('Anambra','Owerri','Enugu','Port Harcourt') THEN 'East' WHEN location IN('Abuja','Ilorin','Kaduna','Kano','Jos') THEN 'North' END AS region FROM student) AS data_prep
From this moment, you can select any data from data_prep. It will work like a regular table.

Now, let's use data from data_prep to calculate the number of students by region:

SELECT region, COUNT(id) AS students FROM (SELECT *, CASE WHEN location IN('Abeokuta','Ibadan','Mokola','Iyana Ipaja','Lagos') THEN 'West' WHEN location IN('Anambra','Owerri','Enugu','Port Harcourt') THEN 'East' WHEN location IN('Abuja','Ilorin','Kaduna','Kano','Jos') THEN 'North' END AS region FROM student) AS data_prep GROUP BY region
When the above query is executed, it returns the result below:

The result shows the count of students by region.

3. Subquery as a filter

When you see a subquery in the WHERE clause, it's a filter to the main query. There are different group of operators you can use to filter the main query.

Logical operators

These include IN, ANY, and ALL. You can use them when a subquery returns multiple values, allowing you to compare column values in your dataset against those returned by the subquery.

You saw an example using IN earlier, so we'll move on to the remaining two.

Scenario: Retrieve records of all male students who are older than any female student. Below is how to achieve this using ANY:

SELECT * FROM student WHERE gender = 'Male' AND age > ANY (SELECT DISTINCT age FROM student WHERE gender = 'Female')
The above query has two parts: the main query and subquery.

Here's the main query:

SELECT * FROM student WHERE gender = 'Male' AND age > ANY (...)
And here's the subquery:

SELECT DISTINCT age FROM student WHERE gender = 'Female'
When you execute the whole query in your management system, it looks like this:

SELECT * FROM student WHERE gender = 'Male' AND age > ANY (SELECT DISTINCT age FROM student WHERE gender = 'Female')
Behind the scenes, the subquery is evaluated first:

SELECT DISTINCT age FROM student WHERE gender = 'Female'
The subquery returns distinct ages of female students from the student table:

The result of the subquery is passed to the main query, making the entire query appear as shown below, behind the scenes:

SELECT * FROM student WHERE gender = 'Male' AND age > ANY (23, 25, 26, 27, 28, 29, 30)
Now, the age of each male student is compared to those of the female students returned by the subquery. The main query will return only those male students whose age is greater than at least one of the female students' ages:

The result shows the details of male students older than at least one female student.

In the query above, the ANY operator needs the male student to be older than at least one of the female students for his record to be returned by the main query.

With ALL, things work a bit differently. The male student has to be older than all female students for his record to be returned. See the query example using ALL below:

SELECT * FROM student WHERE gender = 'Male' AND age > ALL (SELECT DISTINCT age FROM student WHERE gender = 'Female')
Result:

The query returned the only male student older than all the female students.

Comparison operators

These are used to compare column values with a single scalar value returned by the subquery. They include:

• Equals to (==)
• Greater than (>)
• Greater than or equal to (>=)
• Less than (<)
• Less than or equal to (=<)
• Not equal to (<> or !=)

For example, say you want to retrieve the details of students whose ages are greater than the average age of all students. See the query below:

SELECT * FROM student WHERE age > (SELECT AVG(age) FROM student)
When executed, the query returns the details of student whose age is greater than the average age of all students:

Let's talk about the execution order of the query.

First, when you execute the whole query, behind the scenes, the subquery gets evaluated first:

SELECT AVG(age) FROM student
The subquery returns a single value of 25 which is the average age of all students:

Once the subquery returns the value 25, behind the scenes, the whole query looks like the one below:

SELECT * FROM student WHERE age > 25
The main query compares each student's age in the student table with the 25 returned by the subquery. If a student's age is greater than 25, their record is included in the result. Otherwise, it's ignored.

Check out the result of the main query below. Notice that all the values in the age column exceed 25.

You can also change the comparison operator depending on what you want to see. Below are some use cases of other comparison operators.

-- retrieve students whose age is greater or equal to the average age of all students SELECT * FROM student WHERE age >= (SELECT AVG (age) FROM student) -- retrieve students whose age is less than the average age of all students SELECT * FROM student WHERE age < (SELECT AVG (age) FROM student) -- retrieve students whose age is less than or equal the average age of all students SELECT * FROM student WHERE age =< (SELECT AVG (age) FROM student) -- retrieve students whose age is equal to the average age of all students SELECT * FROM student WHERE age = (SELECT AVG (age) FROM student) -- retrieve student whose age is not equal to the average age of all students SELECT * FROM student WHERE age <> (SELECT AVG (age) FROM student) --Alternatively, you can also use !=, which stands for not equal to SELECT * FROM student WHERE age != (SELECT AVG (age) FROM student)

Correlated Subqueries

These types of subqueries depend on a value of the main query in order to work. If executed outside the main query, it won't work.

As an example, say you want to count the number of registrations for each course using a correlated subquery.

First, let's begin with a query that includes a non-correlated subquery as a column, returning the total number of registrations for all courses.

SELECT course_name, (SELECT COUNT(reg_id) FROM registration) AS regs --subquery FROM course
When executed, the main query retrieves the name of each course from the course table, while the subquery calculates the total number of registrations from the registration table. The subquery's result is returned as a derived column and displayed alongside the course_name. See the result below:

But the result above isn't what we need. We actually want the registration counts for each course to appear next to it, not the total registrations for all courses.

To address this, we'll modify the initial non-correlated subquery to be filtered based on a value from the main query, transforming it into a correlated subquery.

See the non-correlated subquery here:

(SELECT COUNT(reg_id) FROM registration) AS regs
To update the above subquery to a correlated subquery, do the following.

First, copy the whole query used earlier and alias the tables of the main and subquery:

-- Alias the course table l and registrations as r SELECT course_name, (SELECT COUNT(reg_id) FROM registration AS r) AS regs FROM course AS l
Next, you connect the table of the main query to that of the subquery using the id column from the course table and the course_id column from the registration table, like this:

SELECT COUNT(reg_id) FROM registration AS r WHERE r.course_id = l.id -- the connection
Now, the above subquery is a correlated subquery. If executed in isolation of the main query, you'll get the result below.

This error simply means that the l.id in the WHERE clause of the subquery is not recognized because it comes from the main query.

For it to work, it must be nested as a column to the main query. See the whole query below:

SELECT course_name, (SELECT COUNT(reg_id) FROM registration AS r WHERE r.course_id = l.id) AS regs -- correlated subquery FROM course AS l
When executed, it returns the result below:

The result above shows the name of courses and the registration count for each of them.

Now, let's understand the execution order of the query.

When the whole query is executed, behind the scenes, the main query gets evaluated first:

SELECT course_name FROM course AS l
The main query doesn't run just once and return all the course names. Instead, it returns the course names one at a time. Also, for each course name returned by the main query, the subquery gets executed for that particular course.

For instance, during the first iteration of the whole query, the first course name the main query returned was data analytics and its ID is CS01. The main query then provides CS01 to the subquery, making the subquery to look like the one below behind the scenes:

SELECT COUNT(reg_id) FROM registration AS r WHERE r.course_id = CS01 -- ID for data analytics
The subquery above counts only the registrations where the course_id matches the value provided by the main query, in this case, CS01. The registration count is then returned alongside the course name.

In the next iteration,

• The main query retrieves a course name and provides its - IDto the subquery.
• The subquery counts the registrations for that specific course.
• The registration count is displayed alongside the course name.

This process continues until all courses in the main query table have been processed. Essentially, the number of courses in the table determines the number of iterations the query will perform.

See final result below:

The final result displays all course names along with their registration counts. Courses with no registrations yet are shown with a count of 0.

The EXISTS operator

EXISTS checks whether a matching row exists in a related table and returns TRUE if one is found and FALSE if none is found.

For example, if you want to identify courses with at least a registration:

SELECT course_name FROM course AS l WHERE EXISTS (SELECT 1 FROM registration AS r WHERE r.course_id = l.id)
The above query is made up of a main query and a correlated subquery.

Here's the main query:

SELECT course_name FROM course AS l WHERE EXISTS (...)
In the main query above, notice that there's no column name before the EXISTS operator. This is because the EXISTS doesn't compare a value in a column of the main query to those returned by the subquery. Instead, EXISTS checks whether the subquery returns at least one row. It evaluates to TRUE if a row is found and FALSE if no row is found:

SELECT 1 FROM registration AS r WHERE r.course_id = l.id
The subquery's role is to check the registration table to see if the ID provided by the main query has any registrations. In the subquery's SELECT statement, you'll notice that no columns are listed, just a placeholder of 1. This is used because the actual value returned by the subquery is irrelevant. What matters is whether a row exists or not.

Now that we've discussed the anatomy of the query, let's dive into understanding it execution.

Let's look at the whole query once again:

SELECT course_name FROM course AS l WHERE EXISTS (SELECT 1 FROM registration AS r WHERE r.course_id = l.id)
Once the whole query above is executed, behind the scenes, its evaluation starts from the FROM clause:

FROM course AS l
Then, the first row of the course table is considered, and the EXISTS checks whether a matching row exists in the subquery:

WHERE EXISTS (SELECT 1 FROM registration AS r WHERE r.course_id = l.id)
Now, assume the first row it considered from the course table is from data analytics and its ID is CS01. This ID will be passed to the subquery, making the subquery look like the one below:

SELECT 1 FROM registration AS r WHERE r.course_id = CS01 --- ID for data analytics
The value, CS01 is compared with values in the course_id column of the registration table. If a matching row is found, EXISTS evaluates to TRUE and data analytics will be included among the courses returned by the main query.

See how EXISTS evaluates the condition below:

EXISTS → TRUE → course included
But if an ID supplied to the subquery finds no matching row in the course_id column of the registration table, EXISTS evaluates to FALSE and the course name won't be included in the result.

See the evaluation flow below:

EXISTS → FALSE → course excluded
This process continues for each row in the main query until all rows have been evaluated. See final result of the whole query below:

The result shows all courses with at least one registration.

What if we want to show those with no registrations yet?

SELECT course_name FROM course AS l WHERE NOT EXISTS (SELECT 1 FROM registration AS r WHERE r.course_id = l.id)
By adding NOT before EXISTS, we reverse the condition. Instead of returning courses with at least one registration, the query returns courses with no registrations:

The result shows the two courses with no registrations yet.

Conclusion

Subqueries can look intimidating at first, especially when they're nested inside larger queries. But once you understand that their purpose is simply to support the main query, they become much easier to work with.

The important thing isn't to memorize every possible subquery pattern. Instead, learn to recognize what the main query needs and how a subquery can provide it. With that mindset, concepts such as derived columns, derived tables, IN, EXISTS, and NOT EXISTS become practical tools rather than complicated SQL syntax.

With enough practice, you'll start seeing subqueries not as a complicated feature of SQL, but as a natural way to break down and solve more complex questions.